HANNA’s new HI 2211 is a microprocessor based pH, mV and
temperature benchtop meter. It features an extra large LCD that
displays pH or mV and temperature simultaneously. The extra large
LCD (6.25” x 1.5”) can be viewed from a distance in a lab.
instrument can measure pH from -2.00 to 16.00 and can be
calibrated at 1 or 2 points using 5 standard buffers. During
calibration, prompts on the LCD guide the user through the
process. Temperature compensation of the pH measurement can be
automatic or manual between -9.9 to 120°C.
2211 features a dual mV range (±399.9 or ±2000 mV) which can be
used for ISE measurements, ORP measurements or to check the offset
and slope of the pH electrode. Other features include a
measurement memory function and a reading stability indicator. The
HI 2211 is supplied with an HI 1131B glass body combination pH
electrode, HI 7662 temperature probe, electrode holder, power
adapter and buffer solutions to get you started.
demanding applications, HANNA’s HI 2210 includes all of the
features of the HI 2211 with the exception of mV mode.
SOM CODE : 1462/221 Model
: COMPANY : HANNA, ITALY.
PH/DC/MV ORP BENCH
METER, GLP,RS 132.
Calibration CheckTM pH Meters
pH electrode, when it is properly manufactured and is kept
clean, will retain its
physical characteristics for a long time. A common problem
associated with pH measurements is the use of a pH electrode that has not been properly cleaned.
This is very important because during
calibration the instrument assumes that the electrode used is clean, and the standardization curve
created during the calibration process
will remain the same until the next calibration. pH meters on the market today will allow
an offset of approximately ± 60
mV. The deviation from
0 mV is not unusual; in fact, it represents the true characteristics
of the pH electrode. The deviation from 0 mV becomes a
problem if it is the result of calibrating a dirty electrode.
Manual (MTC) or Automatic (ATC) temperature
compensation from -20.0 to 120.0°C
body, single junction refillable cell, BNC + pin
stainless steel probe (included)
12VDC adapter (included)
240 x 182 x 74 mm (9.4 x 7.1 x 2.9”)
1.1 Kg (2.5 lb.)
SOM CODE : 1462/301 Model :
pH301 COMPANY : HANNA, ITALY.
Bench pH/mV/Ion/0C Meter. The
pH calibration can be performed at 1, 2 or 3 points with 6
memorized pH values.
The opto-isolated RS232 is bi-directional, so that the user can
operate the meter from the computer key-board. The pH 301
logging function can be used in the pH, mV and ISE modes. The
logging interval is user-selectable. The memory is capable
retaining up to 99 different lots of up to 8000 samples.
SOM CODE : 1462/302 Model :
pH302+HI76405 COMPANY : HANNA, ITALY.
pH/mV/DC PRINTING METER
pH 302 fulfills the needs of general purpose and analytical
laboratories for a single instrument to
measure pH, millivolt (mV), Oxidation Reduction Potential
(ORP), plus specific ions (ISE).
The oversized display is easy
to read and present step-by-step guidance for
Instructions are also provide on the display to correct
calibration errors and guarantees optimal performance
while performing your measurements. Advance memory features also
enable you to recall calibration data to
comply with Good Laboratory Practices (GLP) protocols.
cycle - set the sample number, time and date.
- Custom calibration - calibrate the meter using nonstandard
- GLP Compliance - prints calibration data with date, time, pH
offset and slope
- Time Study 1 - log and print pH, mV, and temperature to a
- Time Study 2 - log and print pH, mV, and temperature to a
- Alarms - set upper and lower pH or mV limits
- International - choice different languages for printed data.
- ISE - print the ion concentration for pH values.
- Connectivity - sets up communication with your computer.
(ISE) ; +1999 (ORP)
0.01 pH; +0.50C
Typical EMC Deviation
0.01 pH; +0.50C;+0.3 mV; +1%
2 points with 3 memorized buffers.
or manual from -9.9 to 1200C
1131B combination, glass body, refillable,
BNC connector (included)
SOM CODE : 1462/211
pH211 COMPANY : HANNA, ITALY.
Bench Meter With Electrode, Probe & Solution.
new pH211 have been designed to be simple without
sacrificing accuracy. meters measures the pH from 0 to 14 and
temperature from 0 to 100 with 0.01 pH and 0.50C
accuracy. The pH211 can also measures mV in two ranges of +399.9
and +1999 mV in conjunction with ISE's and ORP electrodes.
The large display shows pH or mV and temperature at same time.
SOM CODE : 1462/209.
pH209 COMPANY : HANNA, ITALY.
Bench Meter For School With Electrode. The
pH offset and slope are manually adjustable in order to display
the calibration concept and the electrode characteristic to the
students. Measurement can be performed for pH with manual
temperature compensation as well as for REDOX (Reduction Oxidation
Potential). The selected temperature is displayed to ensure better
The LCD displays the temperature comprehensively while manually
compensating for its effects.
- Simple 2-Button Operation.
- Manual Calibration.
- Long Battery Life.
Typical EMC Deviation
0.03 pH; +2 mV
1 or 2 points through offset and
SOM CODE : 1462/23
HI9210N COMPANY : HANNA, ITALY.
Meter With Electrode waterproof Portable. The
HI 9210N is heavy-duty pH meter is designed to provide
laboratory result and accuracy under harsh industrial conditions.
The unit can be calibrated at any pH buffer value.
SOM CODE : 1462/31.
Model : HI991301 COMPANY : HANNA, ITALY.
With Water Proof Case & Electrode.
- 4 instruments in one : pH, conductivity, TDS and
temperature all in one meter with a single probe.
- Tailor made for your application : Customized pH/EC
calibration, select EC/TDS conversion factor and temperature
coefficient and choose the temperature scale that best fits
- Easy of use, accuracy and durability : Two button
operation, microprocessor based, rugged instrument and probe.
to 14.00 pH; 0.0 to 60.00C;
0.00 to 19.99 mS/cm (EC); 0.00 to 10.00 pt. (TDS)
0.10C; 0.01mS/cm; 0.01 pt.
+ 0.50C; + 2% Full Scale (EC/TDS)
0.3 pH; + 10C; + 2% Full Scale
: Automatic from 0 to 600C
1288 pH/EC/TDS probe with built-in