آزمیران
دستگاهای آزمایشگاهی
مواد شیمیایی
شیشه آلات
محیط کشتهای میکروبی
فیلتر یا کاغذ صافی
ملزومات
سکوبندی
مقالات و توضیحات
جستجوهای مرتبط
ملتینگ پوینت Melting Point اتوماتیک ساخت شرکت استوارت انگلستان
ویرایش
90.9.2
اعتبار قیمت
90.11.15
لطفا پس از پایان اعتبار قیمت با شماره تلفن 88920648 تماس حاصل
فرمائید
جهت دریافت کاتالوگ لطفا روی عکس کلیک کنید
تحویل کالا دوماهه میباشد
Maximum temperature 400°C
Utilises latest technology in digital imaging
5.7 Inch colour VGA touch screen display
Unique split design concept
Integrated cooling 350°C to 50°C in 10 minutes
Also available with IQ/OQ documentation
The SMP40 automatic melting point uses the latest technology in digital image processing to accurately identify the melt of up to three samples simultaneously. The unit comes with a 5.7 inch colour VGA display, on which the melt can be watched real time, or the melt video will automatically be saved as an AVI file that can be reviewed later, either on the unit or via PC, providing traceability long after the sample has gone. The result can also be overridden if for any reason you dont agree with the result calculated by the image processing algorithm.
The SMP40 is fully programmable via the touch screen display, once the user has set the plateau temperature up to the maximum temperature of 400°C they can select the ramp rate, between 0.1 and 10°C in 0.1°C increments. During use a library of preset methods can be built up to streamline the method input for repeat measurements. For materials where the user is unaware of an approximate melting point, and therefore unable to set the plateau temperature, the SMP40 can be used in rapid melt mode. During rapid melt mode a fast scan of the full temperature range is undertaken to provide an approximate melt temperature, then a method will be automatically programmed with the appropriate plateau temperature to allow a more accurate measurement to be carried out.
The SMP40 has an innovative split design concept, the unit can be used as normal or the control side and the melt side can be separated, allowing for the maximum in footprint flexibility. After the samples have been loaded the melt side of the unit can be placed at the back of the bench or even in a fume cupboard to catch any potentially dangerous fumes. Once the unit has been split the control panel side can be used in two orientations, either landscape or portrait to allow the perfect viewing angle whether you are sat or stood at the bench, the screen automatically changes orientation with the unit.
The unit can store up to 200 result files with videos, if required data can be easily transferred from the unit to a flash memory drive or PC via one of the USB connectors.
The unit has been designed to include a number of other useful features such as slots to accommodate pre-prepared samples and a draw to house your unused melting point tubes. Also included in the draw is a handy glass cutter, which can be used to accurately cut tubes in half quickly and cleanly for users who prefer to use half tubes.
All units are supplied with a calibration certificate showing individual serial numbers for traceability. The SMP40 conforms to Pharmacopeia and GLP.
Utilises latest technology in digital imaging
5.7 Inch colour VGA touch screen display
Unique split design concept
Integrated cooling 350°C to 50°C in 10 minutes
Also available with IQ/OQ documentation
The SMP40 automatic melting point uses the latest technology in digital image processing to accurately identify the melt of up to three samples simultaneously. The unit comes with a 5.7 inch colour VGA display, on which the melt can be watched real time, or the melt video will automatically be saved as an AVI file that can be reviewed later, either on the unit or via PC, providing traceability long after the sample has gone. The result can also be overridden if for any reason you dont agree with the result calculated by the image processing algorithm.
The SMP40 is fully programmable via the touch screen display, once the user has set the plateau temperature up to the maximum temperature of 400°C they can select the ramp rate, between 0.1 and 10°C in 0.1°C increments. During use a library of preset methods can be built up to streamline the method input for repeat measurements. For materials where the user is unaware of an approximate melting point, and therefore unable to set the plateau temperature, the SMP40 can be used in rapid melt mode. During rapid melt mode a fast scan of the full temperature range is undertaken to provide an approximate melt temperature, then a method will be automatically programmed with the appropriate plateau temperature to allow a more accurate measurement to be carried out.
The SMP40 has an innovative split design concept, the unit can be used as normal or the control side and the melt side can be separated, allowing for the maximum in footprint flexibility. After the samples have been loaded the melt side of the unit can be placed at the back of the bench or even in a fume cupboard to catch any potentially dangerous fumes. Once the unit has been split the control panel side can be used in two orientations, either landscape or portrait to allow the perfect viewing angle whether you are sat or stood at the bench, the screen automatically changes orientation with the unit.
The unit can store up to 200 result files with videos, if required data can be easily transferred from the unit to a flash memory drive or PC via one of the USB connectors.
The unit has been designed to include a number of other useful features such as slots to accommodate pre-prepared samples and a draw to house your unused melting point tubes. Also included in the draw is a handy glass cutter, which can be used to accurately cut tubes in half quickly and cleanly for users who prefer to use half tubes.
All units are supplied with a calibration certificate showing individual serial numbers for traceability. The SMP40 conforms to Pharmacopeia and GLP.
 |
| No of samples | 3 simultaneously |
|---|---|
| Temperature range | Ambient to 400°C |
| Temperature resolution | 0.1°C |
| Display | 5.7 |
| Ramp rates | 0.1-10°C in 0.1°C increments |
| Temperature sensor | PT1000 Platinum resistance |
| Memory | 200 results with video |
| Cool down time 350-50°C | ~10 mins |
| Heat up time 50-350°C | ~ 6 mins |
| Oven control | Closed loop PID |
| Flash memory/PC interface | USB |
| Sample level | 2-3mm in 50mm or 100mm length capillaries |
| Electrical supply | 120V / 230V, 50Hz |
| Temperature units | °C, °F, K |
| Size (h x d x w) | 175 x 210 x 328mm |
| Net Weight | 3.2kg |
| Languages | English, French |
 |
 |
 |
| Model | Description |
|---|---|
| SMP40 | Automatic melting point apparatus, complete with pack of 100 melting point tubes, closed at both ends. |
| SMP40/IQOQ | Automatic melting point apparatus, complete with IQ/OQ documentation and pack of 100 melting point tubes, closed at both ends. |
| SMP2/1 | Glass melting point tubes, closed at both ends, pack of 100 |
فروشنده: فروشگاه
گارانتی اصالت و سلامت کالا
پشتیبانی ۷ روز هفته ۲۴ ساعته
۱۴,۹۰۰,۰۰۰ تومان
(موجود نیست)
محصولات مرتبط
:
۱۸۷,۵۰۰,۰۰۱تومان
۱۱,۲۵۰,۰۰۱تومان
۳,۰۰۰,۰۰۱تومان
