آزمیران
دستگاهای آزمایشگاهی
مواد شیمیایی
شیشه آلات
محیط کشتهای میکروبی
فیلتر یا کاغذ صافی
ملزومات
سکوبندی
مقالات و توضیحات
جستجوهای مرتبط
Low Flow Pumps Pocket Pump 210 Series Smallest Programmable Low Flow Sampler
Pocket Pump Downloads
Pocket pumps require 1/4-inch tubing
SKC Air Sampling Pumps
Advanced Technology in the Smallest Programmable Low Flow Pump
Constant flows from 20 to 225 ml/min
- Accommodates typical flow rates for sorbent tubes
- Only 4.5 x 2.2 x 1.4 inches (11.4 x 5.6 x 3.6cm) and 5 ounces (142 grams)
- Easily fits a shirt pocket or clips on a belt
- Programmability and PC compatibility options
- For greater worker acceptance
- With a multiple low-flow holder and CPC, sample with up to 4 tubes simultaneously, each at a different flow rate if desired
- Save time and use fewer pumps
- Program delayed start, timed run, or multiple sampling schedules
- Download sampling data to a PC for record keeping and data analysis
- Simple 3-button keypad does it all
- All sampling parameters are continuously updated
- Low battery and restricted flow shut off
- Pump stores run time data in memory
- Auto-restart attempted after flow fault
- Flow unaffected by outside interferences
- Accurate air volumes and data validity ensured
- Displays sampling parameters, battery status, and flow fault at the touch of a button
- Built-in system automatically senses maximum charge and switches to trickle charge to prolong battery life and prevent damage; it never overcharges
- Useful for environmental monitoring or 24-hour sampling without harm to the battery pack
- View battery status before, during, and after sampling
- Requires code before changing operating parameters
- Security code minimizes accidental changes or tampering and maintains sample validity
- Rugged case withstands rough handling in the industrial workplace
- UL and cUL Listed
- Model available that meets ATEX Directive 94/9/EC (NiCad battery model only)
- Safe in hazardous locations
- Versatile for all industries
The 3-button Keypad Does It All
Use the three buttons under the sliding cover to operate the Pocket Pump
at flows from 20 to 225 ml/min. Set the flow rate in constant flow mode
for single sorbent tube applications, or
set
the back pressure in constant pressure mode for multiple-tube applications.
The Pocket Pump accommodates flow ranges for most sorbent tube and long-duration
detector tube methods. Users may also select the temperature and pressure
scale. Security code protected operating mode and parameters minimizes
tampering and maintains sample validity. The Pocket Pump may be placed
in HOLD
mode at any time without loss of data.
The Pocket Pump operates in either constant flow (single-tube sampling) or constant
pressure (multiple-tube sampling) mode with flows from 20 to 225 ml/min. Operation
is
programmed using
the 3-button keypad or a PC.
A built-in security code system prevents workers from changing
operating state or parameters, ensuring sample validity. Multiple keys
must be pressed to place the pump in HOLD; accidentally pressing
one button will not alter pump operation.
Direct Readout of Data
The large easy-to-read LCD shows direct readouts of sample data that is continuously
updated and may be displayed during sampling at the touch of a button.
Simply press a key to scroll through the sample data that includes flow rate,
air
volume,
temperature
of the incoming air, and sample time. The LCD constantly displays a battery
status icon, and a flashing flow fault icon appears when flow is restricted
or blocked.
Pump-controlled Charging
Never worry about overcharging again. Since advanced electronics are
built into the pump and not the charger, the smart charging battery
system knows how much charging the pump needs; it never overcharges. The
batteries may be charged with the battery charger while the pump is
running. The Pocket Pump may operate indefinitely with the AC
charger/adapter without harm to the battery pack.
The battery charge status icon is constantly displayed. When the pump loses
all charge, it enters SLEEP mode while preserving the historical data in
memory. When fully charged, the NiMH battery provides 12 hours of continuous
use at 200 ml/min with back pressure up to 10 inches of water. Run times
vary with media used.
PC Programmable with DataTrac Software
Use DataTrac Software (optional accessory) and your personal computer to
make the Pocket Pump PC programmable. DataTrac simplifies chain-of-custody
reporting by allowing users to program up to 14 complete running sequences
including delayed start, and timed run. Pump settings can be changed with
the click of a mouse button. DataTrac’s Real-time Monitor window displays
a real-time readout of the Pocket Pump’s
operations including time and sample volume. Lengthy calculations are unnecessary;
DataTrac does it all for you. The advanced information retrieval system is
specifically designed to store data and provide chain-of-custody information.
DataTrac also stores historical data in pump memory that can be retrieved
up to 24 hours after shutdown.
- Program the flow rate, start and stop date, and sample duration.
- Schedule multiple start and stop times.
- Create a sample setup sheet for worker, sample, and analysis information.
- Download historical records of flow rate, sample time, air volume, temperature, and more.
- Print or save a complete report of sample and pump history information.
Click here to go to the DataTrac Software Page
Pocket Pump for Bag Sampling
SKC offers Pocket Pumps with twin ports — an inlet port and
an exhaust port. The twin port Pocket Pump is ideal for bag sampling
and other applications. Operate Pocket pump from the simple 3-button
integral keypad for
quick grab samples. Or, program Pocket Pump from a PC using DataTrac
for
Pocket Pump Software. Pocket Pump can be programmed for delayed
start and timed runs. The flow range
for the Twin Port Pocket Pump is 20 to 225 ml/min.
Use in non-explosive environments only. This pump is not UL Listed
for intrinsic safety.
Performance Profile
| Flow Range in Constant
Flow Mode |
20 to 225 ml/min |
| Accuracy Variance Between
LCD Reading and Actual Flow Rate (after calibration) |
20 to 225 ml/min ± 5% |
| Constant Flow Compensation
Range (inlet only) |
20 to 225 ml/min up to
20 inches water back pressure |
|
Flow Control Accuracy
|
± 5% of set-point in constant flow after calibration |
| Pressure Range in Constant
Pressure (Multiple-tube Sampling) Mode (inlet only) |
1 to 10 inches of water (1.87
to 18.7 mm Hg) at a maximum flow rate of 200 ml/min for 8
hrs (12 hrs if using NiMH battery) 10 to 20 inches water (18.7 to 37.4 mm Hg) at maximum flow rate of 100 ml/min for 8 hrs (12 hrs if using NiMH battery) |
| Constant Pressure (Multiple-tube
Sampling) Mode Accuracy |
Pressure reading ± 0.5 in
of water (0.25 mm Hg) |
| Operating Temperature |
32 to 113 F (0 to 45 C) |
| Storage Temperature |
-4 to 113 F (-20 to 45 C) |
| Charging Temperature |
40 to 100 F (5 to 38 C) |
| Operating Humidity | 0 to 95% non-condensing |
| Tubing | Requires 1/4-inch ID tubing |
| Run Time |
Varies with flow rate and sampling
media in line |
| Timer Display Range |
1 to 9999 minutes |
| Timing Accuracy |
± 1% |
| Flow Fault |
If the pump is unable to
compensate for longer than 15 seconds due to excessive back
pressure, the pump enters FLOW FAULT mode. The pump goes
into HOLD, the fault icon appears on the display, and the
accumulated run time display is frozen and retained. After
5 minutes in flow fault, auto-restart is attempted every
5 minutes until flow is corrected. |
| Battery Pack |
Rechargeable NiCad battery
pack, 2.4 V x 0.6 Ah or Rechargeable NiMH battery pack, 2.4 V x 1.0 Ah |
| Charge Time (varies with battery capacity and level of discharge) |
< 6 hrs with Pocket Pump charger (battery attached
to pump) |
|
Battery Charge Level Indicator
|
Icon displayed at full, mid, and low charge |
| Weight |
5 oz (142 gm) |
| Dimensions |
4.5 x 2.2 x 1.4 in (11.4
x 5.6 x 3.6 cm) |
| Case |
Impact-resistant stainless steel with ABS/polycarbonate |
| Intrinsically Safe |
UL and cUL Listed |
| RFI/EMI Shielding |
RFI/EMI-shielded case |
Protect sample pump from weather when in use outdoors.
Ordering Information
Pocket pumps require 1/4-inch tubing
| Pocket Pump - NiMH (Nickel Metal Hydride)
Models |
|||
| Description | Voltage |
Cat. No. |
|
| Pocket Pump only, UL Listed, with NiMH battery (requires
charger; see kits or accessories below) ATEX-approved models available (NiCad battery models only); contact SKC |
|||
| Pocket Pump, UL Listed, with NiMH battery and charger, with U.S. plug | 115 V |
||
| Pocket Pump, UL Listed, with NiMH battery and charger, with U.S. plug | 230 V |
||
| Single Pocket Pump Kit includes Pocket Pump with NiMH battery, single charger, and Type A single tube holder, in a soft-side nylon carry case | 115 V |
||
230 V |
|||
| Pocket Pump Starter Kit includes pump with battery, charger, Tygon tubing (3 feet, 1/4-inch ID), and collar clip with cable tie | 115 V
|
||
230 V |
|||
| Single Pocket Pump Kit with Hard-side Pelican Case includes pump with NiMH battery, single charger, Type A tube holder, and hard-side Pelican case | 115 V |
||
230 V |
|||
| 5-pack Pocket Pump Kit with Single Charger includes 5 Pocket Pumps with NiMH batteries, single chargers, and Type A single tube holders, in a Pelican case | 115 V |
||
230 V |
|||
| 5-pack Pocket Pump Kit with Multi-charger* includes 5 Pocket Pumps with NiMH batteries and Type A single tube holders and one 5-station multi-charger, in a Pelican carry case | 115 V |
||
230 V |
210-1001MH5D | ||
| Pocket Pump, ATEX Approved | |||
Twin Port Pocket Pump with NiMH battery pack, for bag sampling applications, requires charger Cat. No 223-228 (115 V) or 223-229 (230V); for tubing see Cat. Nos. 231-9-23 and 231-926
|
 |
||
| Pump Certificate |
|||
| Certificate of Compliance, optional, must be ordered when ordering pumps | |||
| Software |
|||
| DataTrac
Software for Pocket Pump includes software on CD, DataTrac
adapter, and DataTrac cable Requires Windows 98 or higher and available serial port or appropriate adapter compatible with PC and system |
|||
| Calibrators |
|||
| Defender Primary Standard Calibrator,
5 to 500 ml/min, includes lead-acid battery, charger, Optimizer
software, and 39-inch (1-meter) serial cable Software requires Windows XP (sp 2 or 3) or Windows Vista (32-bit version) and an RS-232 port or USB to RS-232 adapter |
 |
||
| Defender Universal Charger, 100-240 V, with U.S., Euro, and Australia plugs | |||
| Defender Universal Charger, 100-240 V, with U.S. plug | |||
| Chargers | |||
| Multiple Charger, 5-station, 115 V, for UL Listed pumps, with U.S. plug |  |
||
| Multiple Charger, 5-station, 110-240 V, for UL Listed pumps, with U.S. plug |  |
||
| Single Charger, 115 V, for UL Listed pumps, CSA approved, with U.S. plug |  |
||
| Single Charge, 230 V, for UL Listed pumps, with U.S. plug |  |
||
| Replacement Battery Packs Replacing batteries with non-approved battery packs voids any warranty and UL Listing for intrinsic safety. |
|||
| Replacement NiMH Battery Pack, for UL Listed model | |||
| Replacement NiCAD Battery Pack, for UL Listed model | |||
| Pump Carry Cases | |||
| Kit Case: Single Deluxe, Pelican |  |
||
| Kit Case: 5-Pack Deluxe, Pelican, on wheels for easy transport |  |
||
| Kit Case: Single Nylon with Shoulder Strap |  |
||
| Sampling Accessories |
|||
| Low Flow Constant Pressure Controller (CPC), for multiple-tube sampling |  |
||
| Twin Port Pocket Pump Tubing Adapter Kit includes two lengths of silicone tubing: 1/8-inch ID, ¼-inch OD for bag fitting and 3/16-inch ID, 3/8-inch OD for pump fitting; use with PTFE tubing Cat. No. 231-9-23 | |||
| PTFE tubing 3/16-in ID (1/4-inch OD) Fits over all SKC bag fittings and Grab Air Pump fittings |
|||
Low
Flow Tube Holder with Plastic Cover
|
|||
|
A - for standard tubes 6-mm OD x 70-mm
length
|
 |
222-3-1 | |
|
B - for tubes 7 or 8-mm OD x 110-mm
length
|
222-3L-1 | ||
|
C - for tubes 10-mm OD x 150-mm length
|
222-3XL-1 | ||
|
D - for tubes10-mm OD x 220-mm length
and shorter tubes
|
|
||
| Replacement Parts and Tools | |||
| Replacement Valves for Pocket Pump, pk/2 | |||
| Replacement Inlet Filter, pk/10 | |||
| Inlet/Pressure Sensor Assembly | |||
| SKC Pneumatic Test Kit, for testing flow compensation in personal sample pumps, 1 to 5 L/min rotameter, 0 to 80 inches magnehelic pressure gauge |  |
||
* |
The Multi-charger is not CSA approved. Pocket Pumps with NiCad battery packs are available from SKC Ltd. The pumps manufactured by SKC Ltd. will not be UL Listed, but will comply with the European regulations for intrinsic safety (ATEX). |
† |
Unlike other pumps, Pocket Pump contains circuitry that controls charging, therefore, the LED on PowerFlex will remain red during the entire charging process. The Pocket Pump LCD will display charge status. |
Pocket Pump Operating Instructions (PDF)
Battery Pack for Pocket Pump Operating Instructions (PDF)
Technical Note: SKC Sample Pump Battery Pack Characteristics and Maintenance (PDF)
MSDS for Nickel Cadmium Battery GPI International (PDF)
MSDS for Nickel Cadmium Battery SANYO Energy (PDF)
MSDS for Nickel-metal Hydride Battery (PDF)
Pocket Pump 210-1002 UL Certificate
Pocket Pump 210-1002 UL Certified for Canada Certificate
Instrucciones de Funcionamento (PDF)
Téléchargement Guide de I'utilisateur (PDF)
Chinese
Language Pocket Pump Operating Instructions (PDF)
SKC Air Sampling Pumps
Pump Accessories (Chargers, Calibrators, Flowmeters)
محصولات مرتبط
:
۱۸۷,۵۰۰,۰۰۱تومان
۱۱,۲۵۰,۰۰۱تومان
۳,۰۰۰,۰۰۱تومان
