اطلاعات سفارش:
HI 9812-5 دارای پروب چند پارامتر HI 1285-5، HI 70007 pH 7.01 کیسه راه حل کالیبراسیون، HI 70032 1382 ppm (mg / L) کیسه راه حل کالیبراسیون، HI 70031 1413 μS / cm کیسه محلول کالیبراسیون، HI 700661 الکترودهای محلول تمیز کردن بسته بندی (2)، باتری، دستورالعمل و کیف حمل ناهموار.
- محدوده pH 0.0 تا 14.0 pH
- EC 0 تا 1990 μS / cm
- TDS 0 تا 1990 ppm
- EC 10 μS / cm
- TDS 10 میلی گرم / لیتر
- درجه حرارت 0 درجه سانتیگراد
- دقت pH ± 0.1 pH
- EC ± 2٪ F.S.
- TDS ± 2٪ F.S.
- دما ± 1 درجه سانتی گراد
- فاکتور تبدیل TDS 0.5 ppm = 1 μS / cm
راهنمای کالیبراسیون در 1 نقطه (تمام پارامترها به جز دما)
تعویض دما خودکار، 0 تا 50 درجه سانتیگراد با ß = 2٪ / ° C (فقط EC / TDS)
پروب HI 1285-5 پلی پروپیلن بدن، پروب چند پارامتر از پیش تقویت شده با سنسور دمای داخلی، کانکتور DIN 8 پین و کابل 1 متری (3.3 ") (شامل)
نوع باتری / عمر 9V / حدود 150 ساعت استفاده مداوم
محیط 0 تا 50 درجه سانتیگراد (32 تا 122 درجه فارنهایت)؛ RH حداکثر 100٪
ابعاد 145 x 80 x 36 میلی متر (5.7 x 3.1 x 1.4 ")
وزن 230 گرم (8.1 اونس)جهت دریافت قیمت با شماره تلفن 88920648 تماس بگیرید - Water resistant
- On-screen tutorial messages for calibration
- Switch parameters at the touch of a button
- Automatic Temperature Compensation for pH and conductivity
- Simple calibration; Dials located on the front panel makes calibration quick and simple, even for non-technical users
- BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings
- Battery % displayed on startup
- Fast response probe included
HI 9812-5 is a pH/EC/TDS waterproof meter designed for simplicity in taking pH, µS/cm, ppm (mg/L) and temperature measurements. The HI 9812-5 is ideal for hydroponics, greenhouses, farming and ground water applications.
Due to the built-in temperature sensor, conductivity readings are
automatically compensated for temperature changes. The temperature
coefficient is fixed
at 2%/°C.
No probe changes are required when switching your measured parameter between pH, conductivity and TDS. These multiparameter meters reduce the number of instruments required for daily water quality analysis.
The specially engineered HI 1285-5 pH/EC/TDS and temperature probe utilizes a fiber junction and gel electrolyte which provide a fast response and reduced contamination. This combination makes the HI 1285-5 particularly designed to withstand harsh environments such as fertilizer solutions.
Order Information:
HI 9812-5 is supplied with
HI 1285-5 multiparameter probe, HI 70007 pH 7.01 calibration solution
sachet, HI 70032 1382 ppm (mg/L) calibration solution sachet, HI 70031
1413 µS/cm calibration solution sachet, HI 700661 electrode cleaning
solution sachets (2), battery, instructions and rugged carrying case.
Range | pH | 0.0 to 14.0 pH |
EC | 0 to 1990 µS/cm | |
TDS | 0 to 1990 ppm | |
Temperature | 0 to 60°C | |
Resolution | pH | 0.1 pH |
EC | 10 µS/cm | |
TDS | 10 mg/L | |
Temperature | 0°C | |
Accuracy | pH | ±0.1 pH |
EC | ±2% F.S. | |
TDS | ±2% F.S. | |
Temperature | ±1°C | |
TDS Conversion Factor | 0.5 ppm = 1 µS/cm | |
Calibration | manual at 1 point (all parameters except temperature) | |
Temperature Compensation | Automatic, 0 to 50°C with ß = 2%/°C (EC/TDS only) | |
Probe | HI 1285-5 polypropylene body, pre-amplified multiparameter probe with internal temperature sensor, 8-pin DIN connector and 1 m (3.3’) cable (included) | |
Battery Type / Life | 9V / approximately 150 hours of continuous use | |
Environment | 0 to 50°C (32 to 122°F); RH max 100% | |
Dimensions | 145 x 80 x 36 mm (5.7 x 3.1 x 1.4”) | |
Weight | 230 g (8.1 oz.) |
: